C-TS414-2023최고덤프문제 & C-TS414-2023최신인증시험덤프데모

Fast2test의 제품을 구매하시면 우리는 일년무료업데이트 서비스를 제공함으로 여러분을 인증시험을 패스하게 도와줍니다. 만약 인증시험내용이 변경이 되면 우리는 바로 여러분들에게 알려드립니다.그리고 최신버전이 있다면 바로 여러분들한테 보내드립니다. Fast2test는 한번에SAP C-TS414-2023인증시험을 패스를 보장합니다.

SAP C-TS414-2023 시험요강:

주제	소개
주제 1	Quality Management in Manufacturing: This topic describes the processes related to implementing QM in Manufacturing.
주제 2	Quality Improvement: It explains the configuration requirements of Quality Improvement.
주제 3	Managing Clean Core: It focuses on the application of core principles to ERP for enhancing business process agility.

>> C-TS414-2023최고덤프문제 <<

C-TS414-2023최신 인증시험 덤프데모, C-TS414-2023시험대비 최신버전 문제

Fast2test의SAP C-TS414-2023덤프로SAP C-TS414-2023시험공부를 하여 시험에서 떨어지는 경우 덤프비용전액을 환불해드릴만큼 저희 덤프는 높은 적중율을 자랑하고 있습니다. 주문번호와 불합격성적표를 메일로 보내오시면 바로 환불가능합니다. 환불해드린후에는 무료업데이트 서비스가 종료됩니다. SAP C-TS414-2023 시험을 우려없이 패스하고 싶은 분은 저희 사이트를 찾아주세요.

최신 SAP Certified Associate C-TS414-2023 무료샘플문제 (Q74-Q79):

질문 # 74
You are using quantitative inspection characteristics during a production results recording.What are some of the results confirmation control indicators available for quantitative results?Note: There are 3 correct answers to this question.

A. Classed recording
B. Mean value and standard deviation
C. Mean value
D. Summarized recording
E. Single result

정답：C,D,E

질문 # 75
To what can you assign the inspection method in the inspection planning? Note: There are 2 correct answers to this question.

A. Inspection characteristic in an operation of an inspection plan
B. Selected set
C. Master inspection characteristic
D. Work center

정답：A,C

설명：
Inspection methods in SAP S/4HANA QM (transaction QK01) define how an inspection is performed and can be assigned to specific objects in inspection planning:
* Master Inspection Characteristic (B): In the MIC master data (transaction QS21/QS23), you can assign an inspection method to specify the procedure (e.g., "Visual inspection"). This is a standard assignment to ensure consistency across plans.
* Inspection Characteristic in an Operation of an Inspection Plan (D): Within an inspection plan (transaction QP01), you can assign an inspection method directly to a characteristic in an operation.
This overrides or supplements the MIC's method if needed, providing flexibility during planning.
* Selected Set (A): Selected sets (transaction QS51) are for qualitative codes, not for assigning inspection methods.
* Work Center (C): Work centers define where an inspection occurs but do not directly accept inspection method assignments in standard SAP QM.
Thus, "Master inspection characteristic" and "Inspection characteristic in an operation of an inspection plan" are the correct answers.References: SAP Help Portal - "Inspection Methods in QM"; SAP S/4HANA QM User Guide - "Inspection Planning".

질문 # 76
You want to create a certificate for an outbound delivery. At which level can you create the certificate?

A. Delivery item level
B. Shipping point level
C. Delivery header level
D. Material level

정답：A

설명：
In SAP S/4HANA QM, outgoing quality certificates are generated for outbound deliveries (e.g., inspection type 10 or 11) to provide quality data to customers:
* Delivery Item Level (C): Certificates are created at the delivery item level (transaction QC20) because each item in a delivery (VL01N) can have unique materials, batches, and inspection results requiring specific certificate data. The certificate profile (transaction QC01) is assigned to material/customer combinations, and the system generates certificates per item based on this linkage (SPRO > QM > Quality Certificates > Outgoing).
* Material Level (A): Certificates aren't created at the material master level; they're tied to specific delivery transactions.
* Shipping Point Level (B): Shipping points manage logistics, not certificate granularity.
* Delivery Header Level (D): While the delivery header exists, certificates are item-specific to reflect individual material quality.
Thus, "Delivery item level" is the correct answer.References: SAP Help Portal - "Outgoing Quality Certificates"; SAP S/4HANA QM User Guide - "Certificate Creation".

질문 # 77
Which of the following are possible starting points for the internal problem-solving process using the 8D methodology? Note: There are 2 correct answers to this question.

A. Item of a quality notification
B. Defect of the defect category production defect
C. Defect of defect category Generic Defect
D. Defects recording for an inspection lot

정답：A,D

설명：
The 8D methodology in SAP QM is an internal problem-solving process triggered by quality issues:
* Defects Recording for an Inspection Lot (A): Recording defects in an inspection lot (e.g., transaction QE51N) can initiate an 8D process via a linked notification (e.g., Q2), a standard starting point (SPRO
> QM > Quality Notifications > 8D Methodology).
* Item of a Quality Notification (C): The notification item (e.g., in QM01) directly supports 8D by documenting the problem (D1) and subsequent steps, a primary entry point.
* Defect of Defect Category Generic Defect (B): "Generic Defect" isn't a standard category; defect types are specific (e.g., production, supplier).
* Defect of the Defect Category Production Defect (D): While relevant, it's the act of recording (A) or notification (C) that starts 8D, not the category alone.
Thus, "Defects recording for an inspection lot" and "Item of a quality notification" are the correct answers.
References: SAP Help Portal - "8D Methodology in QM"; SAP S/4HANA QM User Guide -"Problem Solving".

질문 # 78
Which of the following are features of the clean core dashboard? Note: There are 2 correct answers to this question.

A. It can be accessed by using SAP For Me
B. Customers can grant access to the dashboard to partners
C. Customers can use the dashboard in the dev, test, and production tenants
D. It can be used in all SAP S/4HANA Cloud editions

정답：A,C

설명：
The clean core dashboard in SAP S/4HANA monitors system adherence to clean core principles:
* Customers Can Use the Dashboard in the Dev, Test, and Production Tenants (B): The dashboard is available across all system tenants (development, test, production) to assess clean core status universally.
* It Can Be Accessed by Using SAP For Me (C): SAP For Me (customer portal) provides access to the clean core dashboard, a standard entry point as of 2025.
* Customers Can Grant Access to Partners (A): Partner access isn't a standard feature; it's customer- controlled.
* It Can Be Used in All SAP S/4HANA Cloud Editions (D): Primarily for Cloud Private Edition and Public Cloud, not guaranteed for all editions (e.g., on-premise specifics vary).
Thus, "Customers can use the dashboard in the dev, test, and production tenants" and "It can be accessed by using SAP For Me" are the correct answers.References: SAP Help Portal - "Clean Core Dashboard"; SAP S
/4HANA Cloud User Guide - "SAP For Me".

질문 # 79
......

SAP인증 C-TS414-2023시험을 패스하는 지름길은Fast2test에서 연구제작한 SAP 인증C-TS414-2023시험대비 덤프를 마련하여 충분한 시험준비를 하는것입니다. 덤프는 SAP 인증C-TS414-2023시험의 모든 범위가 포함되어 있어 시험적중율이 높습니다. SAP 인증C-TS414-2023시험패는 바로 눈앞에 있습니다. 링크를 클릭하시고Fast2test의SAP 인증C-TS414-2023시험대비 덤프를 장바구니에 담고 결제마친후 덤프를 받아 공부하는것입니다.

C-TS414-2023최신 인증시험 덤프데모: https://kr.fast2test.com/C-TS414-2023-premium-file.html

Our Blog

Jack Martin Jack Martin

Biography

C-TS414-2023최고덤프문제 & C-TS414-2023최신인증시험덤프데모

SAP C-TS414-2023 시험요강:

C-TS414-2023최신 인증시험 덤프데모, C-TS414-2023시험대비 최신버전 문제

최신 SAP Certified Associate C-TS414-2023 무료샘플문제 (Q74-Q79):

Understanding the Difference Between NVQ, QCF, and RQF Qualifications in the UK

NVQ, QCF, or RQF? Here’s What You Need to Know!