Ron Ward Ron Ward
0 Course Enrolled • 0 Course CompletedBiography
100-150技術試験、100-150日本語版試験解答
弊社のIT業で経験豊富な専門家たちが正確で、合理的なCisco 100-150認証問題集を作り上げました。 弊社の勉強の商品を選んで、多くの時間とエネルギーを節約こともできます。
100-150試験はあなたのキャリアのマイルストーンで、競争が激しいこの時代で、これまで以上に重要になりました。あなたは一回で気楽に100-150試験に合格することを保証します。将来で新しいチャンスを作って、仕事が楽しげにやらせます。Japancertの値段よりそれが創造する価値ははるかに大きいです。我々は弊社の商品とあなたの努力を通してあなたは100-150試験に合格することができると信じています。
100-150試験の準備方法｜完璧な100-150技術試験試験｜ハイパスレートのCisco Certified Support Technician (CCST) Networking日本語版試験解答
親愛なるお客様、当社のウェブサイトにある優れた学習教材の助けを借りて試験を受ける準備ができている場合、選択は素晴らしいものになります。 100-150トレーニング資料：Cisco Certified Support Technician (CCST) Networkingは優れた選択肢であり、特に時間をかけずに試験に合格し、成功することに熱心な方に役立ちます。 次のように、すばらしい製品を詳細に紹介する自由を考えてみましょう。
Cisco Certified Support Technician (CCST) Networking 認定 100-150 試験問題 (Q21-Q26):
質問 # 21
A Cisco PoE switch is shown in the following image. Which type of port will provide both data connectivity and power to an IP phone?
- A. Port identified with number 2
- B. Ports identified with number 7
- C. Ports identified with numbers 3 and 4
- D. Ports identified with number 6
正解：D
解説：
In the provided image of the Cisco PoE switch, the ports identified with number 6 are the standard RJ-45 Ethernet ports typically found on switches that provide both data connectivity and Power over Ethernet (PoE).
PoE ports are designed to supply power to devices such as IP phones, wireless access points, and other PoE- enabled devices directly through the Ethernet cable.
Ports:
*2: Console port (for management and configuration)
*3 and 4: Specific function ports (often for management)
*6: RJ-45 Ethernet ports (capable of providing PoE)
*7: SFP ports (for fiber connections, typically do not provide PoE)
Thus, the correct answer is C. Ports identified with number 6.
References :=
*Cisco Catalyst 2960-L Series Switches Data Sheet
*Cisco PoE Overview
質問 # 22
HOTSPOT
For each statement about bandwidth and throughput, select True or False. Note: You will receive partial credit for each correct selection.
正解：
解説：
Explanation:
Statement 1: Low bandwidth can increase network latency.
True: Low bandwidth can result in increased network latency because the network may become congested, leading to delays in data transmission.
Statement 2: High levels of network latency decrease network bandwidth.
False: High levels of network latency do not decrease the available network bandwidth, but they do affect the perceived performance and throughput of the network.
Statement 3: You can increase throughput by decreasing network latency.
True: Decreasing network latency can increase throughput because data can be transmitted more quickly and efficiently without delays.
Bandwidth vs. Latency: Bandwidth refers to the maximum rate at which data can be transferred over a network path. Latency is the time it takes for a data packet to travel from the source to the destination.
Low bandwidth can cause network congestion, which can increase latency as packets wait to be transmitted.
High latency does not reduce the actual bandwidth but can affect the overall performance and efficiency of data transmission.
Reducing latency can lead to higher throughput because the network can handle more data in a given period without delays.
Reference: Network Performance Metrics: Cisco Network Performance
Understanding Bandwidth and Latency: Bandwidth vs. Latency
質問 # 23
Computers in a small office are unable to access companypro.net. You run the ipconfig command on one of the computers. The results are shown in the exhibit.
You need to determine if you can reach the router.
Which command should you use? Complete the command by selecting the correct options from each drop- down lists.
正解：
解説：
Explanation:
To determine if you can reach the router, you should use the ping command followed by the IP address of the router. The ping command is a network utility used to test the reachability of a host on an Internet Protocol (IP) network and to measure the round-trip time for messages sent from the originating host to a destination computer.
The Default Gateway in the ipconfig results is typically the router's IP address in a home or small office network. In this case, the Default Gateway is 192.168.0.1, which is the address you would ping to check connectivity to the router.
References :=
* How to Use the Ping Command
* Testing Network Connectivity with the Ping Command
To determine if you can reach the router, you should use the ping command with the IP address of the router.
* Command: ping
* Target: 192.168.0.1
So, the completed command is:
* ping 192.168.0.1
Step by Step Comprehensive and Detailed Explanation:
* ping: The ping command sends ICMP Echo Request messages to the target IP address and waits for an Echo Reply. It is commonly used to test the reachability of a network device.
* 192.168.0.1: This is the IP address of the default gateway (the router) as shown in the ipconfig output.
Pinging this address will help determine if the computer can communicate with the router.
References:
* Using the ping Command: ping Command Guide
質問 # 24
Which two statements are true about the IPv4 address of the default gateway configured on a host? Note: You will receive partial credit for each correct selection. (Choose 2.)
- A. Hosts learn the default gateway IPv4 address through router advertisement messages.
- B. The same default gateway IPv4 address is configured on each host on the local network.
- C. The default gateway is the Loopback0 interface IPv4 address of the router connected to the same local network as the host.
- D. The default gateway is the IPv4 address of the router interface connected to the same local network as the host.
- E. The IPv4 address of the default gateway must be the first host address in the subnet.
正解：B、D
解説：
* Statement B: "The same default gateway IPv4 address is configured on each host on the local network." This is true because all hosts on the same local network (subnet) use the same default gateway IP address to send packets destined for other networks.
* Statement D: "The default gateway is the IPv4 address of the router interface connected to the same local network as the host." This is true because the default gateway is the IP address of the router's interface that is directly connected to the local network.
* Statement A: "The IPv4 address of the default gateway must be the first host address in the subnet." This is not necessarily true. The default gateway can be any address within the subnet range.
* Statement C: "The default gateway is the Loopback0 interface IPv4 address of the router connected to the same local network as the host." This is not true; the default gateway is the IP address of the router's physical or logical interface connected to the local network.
* Statement E: "Hosts learn the default gateway IPv4 address through router advertisement messages." This is generally true for IPv6 with Router Advertisement (RA) messages, but not typically how IPv4 hosts learn the default gateway address.
Reference: * Cisco Default Gateway Configuration: Cisco Default Gateway
質問 # 25
Examine the following output:
Which two conclusions can you make from the output of the tracert command? (Choose 2.) Note: You will receive partial credit for each correct answer.
- A. The device sending the trace has IPv6 address 2600:1408:c400:38d :: b33.
- B. The IPv6 address associated with the www.cisco.com server is 2600:1408: c400: 38d: : b33.
- C. The routers at hops 5 and 6 are offline.
- D. The trace failed after the fourth hop.
- E. The trace successfully reached the www.cisco.com server.
正解：B、E
解説：
*Statement A: "The trace successfully reached the www.cisco.com server." This is true as indicated by the
"Trace complete" message at the end, showing that the trace has reached its destination.
*Statement C: "The IPv6 address associated with the www.cisco.com server is 2600:1408:c400:38d::b33." This is true because the final hop in the trace, which is the destination, has this IPv6 address.
*Statement B: "The trace failed after the fourth hop." This is incorrect as the trace continues beyond the fourth hop, despite some intermediate timeouts.
*Statement D: "The routers at hops 5 and 6 are offline." This is not necessarily true. The routers might be configured to not respond to traceroute requests.
*Statement E: "The device sending the trace has IPv6 address 2600:1408:c400:38d::b33." This is incorrect; this address belongs to the destination server, not the sender.
References:
*Understanding Traceroute: Traceroute Guide
質問 # 26
......
当社Japancertは、製品の品質が非常に重要であることを深く知っているため、100-150テストトレントの高品質の開発に注力しています。当社の製品を購入したすべてのお客様は、100-150ガイド急流に深い印象を残しています。もちろん、顧客は製品の高品質だけでなく、製品の効率性にも深い印象を残しています。 100-150試験の質問は多くの時間を節約するのに役立ちます。100-150試験準備を使用する場合、学習に20〜30時間を費やすだけで、100-150試験に合格できます。
100-150日本語版試験解答: https://www.japancert.com/100-150.html
Ciscoさまざまな顧客がさまざまなニーズを持っていることを考慮して、3つのバージョンの100-150テストトレントを提供しています、専門的な団体と正確性の高いCiscoの100-150問題集があるこそ、Japancertのサイトは世界的で100-150試験トレーニングによっての試験合格率が一番高いです、Cisco 100-150技術試験 正確の質問解答と高い通過率、実際の試験に表示される質問と正確な解答はあなたのCisco 100-150認定資格試験合格を手伝ってあげます、Cisco 100-150試験に合格することは簡単ではなくて、適切な訓练を選ぶのはあなたの成功の第一歩です、当社Ciscoのソフトウェアバージョンには、実際の100-150試験環境をシミュレートするという利点があります。
結子 わかる、趣味の悪いピンクのポロシャツに見覚えがあった、Ciscoさまざまな顧客がさまざまなニーズを持っていることを考慮して、3つのバージョンの100-150テストトレントを提供しています、専門的な団体と正確性の高いCiscoの100-150問題集があるこそ、Japancertのサイトは世界的で100-150試験トレーニングによっての試験合格率が一番高いです。
100-150試験テストエンジン、100-150 試験準備資料 、Cisco Certified Support Technician (CCST) Networking 練習問題
正確の質問解答と高い通過率、実際の試験に表示される質問と正確な解答はあなたのCisco 100-150認定資格試験合格を手伝ってあげます、Cisco 100-150試験に合格することは簡単ではなくて、適切な訓练を選ぶのはあなたの成功の第一歩です。
- 効果的-真実的な100-150技術試験試験-試験の準備方法100-150日本語版試験解答 🎣 ▶ jp.fast2test.com ◀サイトで⇛ 100-150 ⇚の最新問題が使える100-150日本語サンプル
- 100-150問題集 🎵 100-150問題集 😣 100-150最新資料 👇 ✔ www.goshiken.com ️✔️を開いて✔ 100-150 ️✔️を検索し、試験資料を無料でダウンロードしてください100-150全真問題集
- 100-150資格受験料 🪑 100-150日本語問題集 🎀 100-150試験解説 🎹 ✔ www.jpexam.com ️✔️で[ 100-150 ]を検索して、無料で簡単にダウンロードできます100-150日本語問題集
- ユニークな100-150技術試験一回合格-素晴らしい100-150日本語版試験解答 🍇 《 www.goshiken.com 》から簡単に➠ 100-150 🠰を無料でダウンロードできます100-150最新対策問題
- 素敵Cisco 100-150｜便利な100-150技術試験試験｜試験の準備方法Cisco Certified Support Technician (CCST) Networking日本語版試験解答 🎋 ▷ www.pass4test.jp ◁を開き、➤ 100-150 ⮘を入力して、無料でダウンロードしてください100-150問題集
- 100-150復習過去問 🏉 100-150日本語版復習指南 🐚 100-150試験解説 🚈 ⇛ www.goshiken.com ⇚には無料の「 100-150 」問題集があります100-150全真問題集
- 100-150日本語版復習指南 🚆 100-150問題集 🏭 100-150過去問 🤪 最新☀ 100-150 ️☀️問題集ファイルは➽ www.pass4test.jp 🢪にて検索100-150日本語問題集
- 100-150全真問題集 🕘 100-150試験解説 🏹 100-150最新資料 🐙 ウェブサイト⮆ www.goshiken.com ⮄から《 100-150 》を開いて検索し、無料でダウンロードしてください100-150資格受験料
- 100-150復習過去問 ❤ 100-150最新対策問題 🤤 100-150最新資料 ↘ ➥ www.it-passports.com 🡄の無料ダウンロード「 100-150 」ページが開きます100-150難易度受験料
- 100-150認定試験 🦹 100-150全真問題集 🚕 100-150認定試験 🏬 ▶ www.goshiken.com ◀から簡単に⏩ 100-150 ⏪を無料でダウンロードできます100-150日本語問題集
- 100-150最新資料 🍊 100-150日本語受験攻略 🧺 100-150日本語受験攻略 ⤵ URL ▛ www.it-passports.com ▟をコピーして開き、⇛ 100-150 ⇚を検索して無料でダウンロードしてください100-150模擬試験最新版
- 100-150 Exam Questions
- pyplatoonsbd.com training.lightoftruthcenter.org blacksoldierflyfarming.co.za netflowbangladesh.com americasexplorer.onegodian.org kelas.fauzan.icu goaanforex.com edusoln.com zeeboomba.net tutorsteed.com